BLOG

Conveying objects up and/or down an incline Appropriate slope and speed should be considered.

Used in concrete mixing plants

Using in biomass power plants.

Can be designed for use in applications that require heavy loads, high dust, high ambient temperatures and low maintenance. very well.

Belt conveyor can be built in many forms. to meet the needs of customers.

Used to transport small workpieces Good for hard or sharp workpieces Commonly used for conveying workpieces or scraps from hydraulic pumps machine or auto lathes.

If we want to make cement screws without using the cement screw gear set. We can prevent dust from entering the bearing assembly. By bringing the seal box at the end of the gear head set, the cement screw is installed to prevent dust for the bearing.

Use for cement screw conveyor gear box. Use for shaft size 50 mm or 70 mm.

Multi-functional design Inexpensive, easy to maintain

Model #219, length 14.3 m. Used in cement mixing plant.

Economical price, easy care, practical use It is used to control ash emissions in waste, biomass or coal-fired power plants.

Size width = 100 mm, height = 10 m. Food grade.

Production and distribution Conveyor rollers for general industrial applications

Use in general purpose.

Bending of the conveyer screw shaft is done in several ways. But that we often use 2 methods Is bending by mechanical method (using a hydraulic jack) or bending by heat method (welding or using a gas nozzle).

Single shaft Dia. 0.45 m, length 9 m. Ashes conveying under the boiler Use water to cool the central shaft.

This can be determined by selecting either hand that can be extended with the thumb parallel to the axis of the screw conveyer. And can hold all four fingers around the axis of the screw conveyer In the same direction as the flight around the axis of the screw conveyer. If it's the left hand, it's called the left hand, or if it's the right hand,

The construction of a screw conveyor using the blade pitch at the entrance short pitch than the general pitch (conveying pitch) is another way to prevent knocking of the screw conveyors. Due to the compression of the material during the conveying after the material compresses at the inlet, when it reaches the conveying range, the pitch is wider. The material will break down, not compact, making it easy to flow. To calculate the loading rate of this type of screw conveyor, the inlet pitch is used to calculate, in other words, the inlet conveyor screw blade pitch determines the material handling rate.

Box or work pieces can accumulation on the conveyor.

Use in packing line.

Use to control feed of lime to the pneumatic conveyor.

The device, in conjunction with a rotary airlock, receives material released from silos for feeding to pneumatic conveyor.

Used to mix syrups in sugar factories.

Overhaul work are possible for our product.

Model: D250mm x L 17.4 m. Used in soy mill.

Happy New Year 2021

For the long distant conveying, Belt conveyor is one kind of low cost equipment.

W=2.0 m., L = 2.0 m. Operate in paper industry.

Model: D250mm x L 13 m. Used in soy mill.

As show is drive by belt. Use in paper manufacturer.